Windows Server 2008 Core Installation

Features
By published

Establishing The Network (continued)

Adding A DNS Server

DNS server addresses must be added one at a time, also using the netsh command. Here’s an example:

Article continues below

Adding a DNS server

The DNS settings are listed in the correct order

Resetting And DCHP Autoconfiguration

If the configuration is once again set to automatic allocation of addresses by DHCP, the source output is set using DHCP. In this way, the IP addresses and the DNS entries are removed, and set by the server:

Netsh interface ipv4 set address>

Resetting DHCP